Omron CJ1W-AD041-V1, Operation Manual

Page: 73 / 427

50
Exchanging Data with the CPU Unit Section 2-5
Allocation for Adjustment
Mode For adjustment mode, turn ON the operation mode switch on the rear panel of
the Unit as shown in the following diagram, or set bits 00 to 07 in DM word
m+18 (m+19 for CS1W-AD161) to C1. When the Unit is set for adjustment
mode, the ADJ indicator on the front panel of the Unit will flash.
The allocation of CIO words and bits is shown in the following table.
CS1W-AD041-V1/AD081-V1
Note 1. Use settings 1 to 4 for the CS1W-AD041-V1.
2. With the CS1W-AD041-V1, bits 04 to 07 in word n+9 (disconnection detec-
tion) are not used.
CS1W-AD161
Note 1. For the CIO word addresses, n = CIO 2000 + unit number x 10.
I/O Word Bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Output
(CPU to
Unit) n Not used. Inputs to be adjusted
2 (fixed) 1 to 8 (1 to 4) (See note
1.)
n + 1 Not used. Not used. Clr Set Up Down Gain Off-
set
n + 2 Not used.
n + 3 Not used.
n + 4 Not used.
n + 5 Not used.
n + 6 Not used.
n + 7 Not used.
Input
(Unit to
CPU) n + 8 Conversion value at time of adjustment
16
3
16
2
16
1
16
0
n + 9 Alarm Flags Disconnection detec-
tion (See note 2.) Not used.
Input
8 Input
7 Input
6 Input
5 Input
4 Input
3 Input
2 Input
1
I/O Word Bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Output
(CPU to
Unit) n Not used. Inputs to be adjusted (See note 2.)
n + 1 Not used. Clr Set --- --- Gain Off-
set
n + 2
to
n+16 Not used.
Input
(Unit to
CPU) n + 17 Conversion value at time of adjustment
16
3
16
2
16
1
16
0
n + 18 Disconnection detection
Input
16 Input
15 Input
14 Input
13 Input
12 Input
11 Input
10 Input
9 Input
8 Input
7 Input
6 Input
5 Input
4 Input
3 Input
2 Input
1
n + 19 Alarm Flags Not used.