Omron CJ1W-AD041-V1, Operation Manual

Page: 38 / 427

15
Specifications Section 2-1
Note 1. Do not apply a voltage higher than 600 V to the terminal block when per-
forming withstand voltage test on this Unit. Otherwise, internal elements
may deteriorate.
2. Refer to Dimensions on page 359 for details on the Unit’s dimensions.
3. The maximum number of Analog Input Units that can be mounted to one
Rack depends on the Power Supply Unit mounted to the Rack.
The above limits may be reduced depending on the power consumed by
other Units on the same Rack.
Input
func-
tions Mean value processing Stores the last “n” data conversions in the buffer, and stores the mean value of the
conversion values.
Buffer number: n = 2, 4, 8, 16, 32, 64
Peak value holding Stores the maximum conversion value while the Peak Value Hold Bit is ON.
Input disconnection
detection Detects the disconnection and turns ON the Disconnection Detection Flag. (See note
11.)
Scaling function None None Enabled only for conver-
sion time of 1 ms and reso-
lution of 4,000. Setting any
values within a range of
±
32,000 as the upper and
lower limits allows the A/D
conversion result to be out-
put with these values as
full scale.
Item CS1W-AD041-V1 CS1W-AD081-V1 CS1W-AD161
Power Supply Unit Rack CS1W-
AD041-V1
CS1W-
AD081-V1
(5 VDC
120 mA)
CS1W-DA041
CS1W-DA08V
(5 VDC
130 mA)
CS1W-
MAD44
(5 VDC
200 mA)
CS1W-DA08C
(5 VDC
130 mA)
CS1W-AD161
(5 VDC
150 mA)
C200HW-PA204
C200HW-PA204S
C200HW-PA204R
C200HW-PA204C
C200HW-PD024
(4.6 A at 5 VDC) CPU Rack 6 3 3 2 8
Expansion Rack 6 3 3 2 9
C200HW-PA209R
(9 A at 5 VDC) CPU Rack 10 7 6 5 10
Expansion Rack 10 7 6 5 10
CS1D-PA207R
(7 A at 5 VDC) CPU Rack 8 5 4 4 8
Expansion Rack 9 6 5 4 9
CS1D-PD024
(4.3 A at 5 VDC) CPU Rack 6 3 2 2 7
Expansion Rack 6 3 2 2 8