Omron CJ1G-CPUxx, Instructions Manual

Page: 1083 / 1144

1062
CS-series Instruction Execution Times and Number of Steps Section 4-1
Note 1. When a double-length operand is used, add 1 to the value shown in the
length column in the following table.
2. Immediate refreshing is not supported by the CS1D CPU Units.
3. Not supported by the CS1D CPU Units.
4-1-7 Data Shift Instructions
SINGLE
WORD DIS-
TRIBUTE DIST 080 4 5.1 5.4 7.0 7.0 ---
DATA COL-
LECT COLL 081 4 5.1 5.3 7.1 7.1 ---
MOVE TO
REGISTER MOVR 560 3 0.08 0.08 0.42 0.50 ---
MOVE
TIMER/COUN
TER PV TO
REGISTER MOVRW 561 3 0.42 0.50 0.42 0.50 ---
Instruction Mnemonic Code Length
(steps)
(See note.)
ON execution time (
µ
s) Conditions
CPU6 @ H CPU4 @ H CPU6 @ CPU4 @
Instruction Mnemonic Code Length
(steps)
(See note.)
ON execution time (
µ
s) Conditions
CPU6
@
H CPU4
@
H CPU6
@
CPU4
@
SHIFT
REGISTER SFT 010 3 7.4 10.4 10.4 10.4 Shifting 1 word
433.2 488.0 763.1 763.1 Shifting 1,000
words
REVERSIBLE
SHIFT
REGISTER SFTR 084 4 6.9 7.2 9.6 9.6 Shifting 1 word
615.3 680.2 859.6 859.6 Shifting 1,000
words
ASYNCHRO-
NOUS SHIFT
REGISTER ASFT 017 4 6.2 6.4 7.7 7.7 Shifting 1 word
1.22 ms 1.22 ms 2.01 ms 2.01 ms Shifting 1,000
words
WORD SHIFT WSFT 016 4 4.5 4.7 7.8 7.8 Shifting 1 word
171.5 171.7 781.7 781.7 Shifting 1,000
words
ARITHMETIC
SHIFT LEFT ASL 025 2 0.22 0.32 0.29 0.37 ---
DOUBLE
SHIFT LEFT ASLL 570 2 0.40 0.56 0.50 0.67 ---
ARITHMETIC
SHIFT RIGHT ASR 026 2 0.22 0.32 0.29 0.37 ---
DOUBLE
SHIFT RIGHT ASRL 571 2 0.40 0.56 0.50 0.67 ---
ROTATE LEFT ROL 027 2 0.22 0.32 0.29 0.37 ---
DOUBLE
ROTATE LEFT ROLL 572 2 0.40 0.56 0.50 0.67 ---
ROTATE LEFT
WITHOUT
CARRY RLNC 574 2 0.22 0.32 0.29 0.37 ---
DOUBLE
ROTATE LEFT
WITHOUT
CARRY RLNL 576 2 0.40 0.56 0.50 0.67 ---
ROTATE
RIGHT ROR 028 2 0.22 0.32 0.29 0.37 ---