Omron CJ1G-CPUxx, Instructions Manual

Page: 1082 / 1144

1061
CS-series Instruction Execution Times and Number of Steps Section 4-1
Note 1. When a double-length operand is used, add 1 to the value shown in the
length column in the following table.
2. Immediate refreshing is not supported by the CS1D CPU Units.
3. Not supported by the CS1D CPU Units.
4-1-6 Data Movement Instructions
TABLE COM-
PARE TCMP 085 4 14.0 15.2 21.9 21.9 ---
MULTIPLE
COMPARE MCMP 019 4 20.5 22.8 31.2 31.2 ---
UNSIGNED
BLOCK COM-
PARE BCMP 068 4 21.5 23.7 32.6 32.6 ---
AREA RANGE
COMPARE ZCP 088 3 5.3 5.4 --- --- ---
DOUBLE
AREA RANGE
COMPARE ZCPL 116 3 5.5 6.7 --- --- ---
Instruction Mnemonic Code Length
(steps)
(See note.)
ON execution time (
µ
s) Conditions
CPU6 @ H CPU4 @ H CPU6 @ CPU4 @
Instruction Mnemonic Code Length
(steps)
(See note.)
ON execution time (
µ
s) Conditions
CPU6 @ H CPU4 @ H CPU6 @ CPU4 @
MOVE MOV 021 3 0.18 0.20 0.25 0.29 ---
!MOV (See
note 2.) 021 7 +21.38 +21.40 +42.36 +42.36 Increase for CS
Series
+90.52 +90.52 +90.52 +90.52 Increase for
C200H
(See note 3.)
DOUBLE
MOVE MOVL 498 3 0.32 0.34 0.42 0.50 ---
MOVE NOT MVN 022 3 0.18 0.20 0.25 0.29 ---
DOUBLE
MOVE NOT MVNL 499 3 0.32 0.34 0.42 0.50 ---
MOVE BIT MOVB 082 4 0.24 0.34 7.5 7.5 ---
MOVE DIGIT MOVD 083 4 0.24 0.34 7.3 7.3 ---
MULTIPLE
BIT TRANS-
FER XFRB 062 4 10.1 10.8 13.6 13.6 Transferring 1
bit
186.4 189.8 269.2 269.2 Transferring 255
bits
BLOCK
TRANSFER XFER 070 4 0.36 0.44 11.2 11.2 Transferring 1
word
300.1 380.1 633.5 633.5 Transferring
1,000 words
BLOCK SET BSET 071 4 0.26 0.28 8.5 8.5 Setting 1 word
200.1 220.1 278.3 278.3 Setting 1,000
words
DATA
EXCHANGE XCHG 073 3 0.40 0.56 0.5 0.7 ---
DOUBLE
DATA
EXCHANGE XCGL 562 3 0.76 1.04 0.9 1.3 ---