Omron 3G8F7-CRM21, User Manual

Page: 64 / 238

44
Access to I/O Data Section 4-1
4-1-3 Access to I/O Data (with Initial OUT Data-Value Setting Function)
When the communications cycle is started without making any initial setting
for the OUT data, it keeps sending 0 data until the OUT write function is
executed.
Take these steps to set the initial value as the OUT data and to start the
communications data from the user application.
YES
NO
(Open Board)
CPNT_Open
(Start communications cycles)
CPNT_StartCycle
Loop Start
(Read Basic status group)
CPNT_GetStatus
An error on the basic
status group?
Error solving
(Write OUT data)
CPNT_SetOutData
CPNT_SetBitOutData
(Read IN data)
CPNT_GetInData
CPNT_GetBitInData
Data Inputs and
Outputs
End processing
Loop End
(Stop communications cycles)
CPNT_StopCycle
(Close Board)
CPNT_Close
Initial processing
(Write Initial values of OUT
data)
CPNT_SetOutData
CPNT_SetBitOutData