4-95
4-2 Function Mode
4
Func
tions
Signal During RUN
• While the Inverter is running, this signal is output via multi-function output terminals P1 to P5 or the
relay output terminal.
• Allocate "00" (RUN) to any of multi-function output terminals P1 to P5 (C021 to C025) or the relay
output terminal (C026).
• This signal is also output during DC injection braking.
Below is the time chart.
Frequency Arrival Signal
• When the output frequency reaches the set level, a frequency arrival signal is output.
• For elevating machines, use this signal for applying the brake. To release the brake, use the
overtorque signal.
• Allocate "01" (FA1: Constant speed arrival signal), "02" (FA2: Set frequency exceeded), "06" (FA3:
Set frequency only), "24" (FA4: Set frequency exceeded 2), or "25" (FA5: Set frequency only 2) to
any of multi-function output terminals P1 to P5 (C021 to C025) or the relay output terminal (C026).
• Below is the hysteresis of the frequency arrival signal:
ON: (Set frequency - 1% of the maximum frequency) (Hz)
OFF: (Set frequency - 2% of the maximum frequency) (Hz)
If "06" (FA3) or "25" (FA5) is set, however, operation during acceleration is:
ON: (Set frequency - 1% of the maximum frequency) (Hz)
OFF: (Set fre 2% of the maximum frequency) (Hz)
and operation during deceleration is:
ON: (Set fre 1% of the maximum frequency) (Hz)
OFF: (Set frequency - 2% of the maximum frequency) (Hz)
Output frequency
FW
RUN
Parameter
No.
Function name
Data
Default
setting
Unit
C042
Arrival frequency during
acceleration
0.0: Does not output arrival signal during acceleration.
0.1 to 400.0: Outputs arrival signal during acceleration.
0.0
Hz
C045
Arrival frequency during
acceleration 2
C043
Arrival frequency during
deceleration
0.0: Does not output arrival signal during deceleration.
0.1 to 400.0: Outputs arrival signal during deceleration.
0.0
Hz
C046
Arrival frequency during
deceleration 2
Summary of Contents for 3G3RX Series
