OVR 4100S/8100S/6100SN v1.0
User Guide
Omnivision Pty Ltd
Page 35 of 98
3-9 UTILITY SETUP
Item
Description
HDD Initialization
Select to enter the hard disk initialization menu.
Please
stop recording before entering this menu.
When you
enter the menu, system will show all the data (model,
volume) of HDD that is installed in the DVR. Check the
HDD you’d like to initialize and then press “Start”. HDD
initialization is successful when the status shows
“Succeed”
USB Initialization
Clean up all data on USB. Enter USB initialization and
press YES to clean up all data on your USB. The
initialization is done when it’s showed “Succeed”.
System Recovery
Restore system default values
Reset System Events
Reset all the recording events in DVR.
Copy Setup to USB
Copy configuration to a USB device. There will be a file
named
「
sdvr_conf.dat
」
on your USB.
Download Setup from USB
Upload the saved configuration from a USB device into the
DVR.
Upgrade
Upgrade DVR through USB.
Please stop recording and backup setup configuration
before upgrading.
System will reboot automatically when the upgrade is
completed.
Notice! DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE
as it may cause incomplete firmware upgrade and damage to the DVR.
Summary of Contents for 16CH H264 DVR
Page 5: ...NSTRUCTION 90...
