00024203.DOC, Version 1.3
16/33
6. PROBLEM CART
PROBLEM:
REMEDY:
No power.
Check the connection cable of the power unit and any extension-cables.
No sound; receiver RF-
LED does not flash.
Make sure POWER switches on transmitter and receiver are on.
Check transmitter Power-LED to ensure that battery is providing power.
Replace battery if necessary.
Check receiver squelch setting.
Make sure that the receiver is in the line of sight of the transmitter. If
necessary, reduce the distance between transmitter and receiver.
No receiver sound;
receiver RF-LED flashes.
Turn up the receiver audio output LEVEL control.
Check for proper connection between receiver and microphone mixer.
Talk into the microphone and observe the receiver RF-LED. If it flashes, the
problem is elsewhere in the sound system.
Received signal is noisy
or contains extraneous
sounds with transmitter
on.
Check transmitter Power-LED to ensure that battery is providing power.
Remove local sources of RF interference, such as lighting equipment .
Two transmitters may be operating on the same frequency. Locate and turn
one off.
Signal may be too weak. If possible, move receiver closer to the transmitter.
Adjust receiver Squelch-control.
Noise from receiver with
transmitter off.
Adjust receiver Squelch-control.
Remove local sources of RF interference, such as lighting equipment.
Reposition the receiver.
Momentary loss of sound
as transmitter is moved
around performing area.
Reposition receiver and perform another test and observe the RF-LED. If
audio drop-outs persist, mark these dead spots in the performing area and avoid
them during the performance.
7. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the batteries. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging the batteries".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.