Sending a Scan
In-Cab Scanner Installation
24-4
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
80-J4866-2 Rev. G
3.
Tap the
Calibrate
button. Wait a few minutes for the calibration to complete.
4.
Tap the
Scan
tab to return to the scanning home screen.
Sending a Scan
1.
On the Home screen, tap the
Scanner
icon.
2.
Insert the paper, face down.
• It will go in about 1/2".
• If it’s not 8-1/2" wide, line it up with the right edge.
Note
The small tooth in the slot must be covered.
3.
Tap the
Scan Page
button.
Note
If the preview box is checked, a preview page appears. Tap the
Accept
button.
4.
After the page goes through, insert another page and tap the
Add Page
button, or if you
are finished, tap the
Done
button.
