OmniTek Ultra XR, User Manual

Page: 175 / 184

Ultra XR User Guide C–7 XR-56-201 5
Applic
ations
Picture False Colour Display
The dynamic range of the video image
can be displayed on the Picture tile as
false colours representing areas of the
image that may be outside the viewable
dynamic range of the monitor itself.
The false colour display can show area
within SDR and those with HDR for the
chosen colour space and data range.
The
Picture
control panel, that appear when the
Picture
tile is selected, allows closed captions /
subtitles to be displayed over the Picture.
False Colour
allows the type of false colour to be selected: "O-Zone",
"M-HDRZone", C-HDRZone", M-HDRFull", "C-HDRFull" or "SDR-Zone .
Flash , when enabled (1) will flash the false colour on and off instead of
the false colour being permanently shown.
SDR-Max sets the maximum value for SDR. Above this will be HDR.
Error Mode
enables normal out of gamut errors to be displayed in red.
Error Level defines the level above which gamut errors will be displayed.
See the "False Colour Display" section in the Viewer chapter for details
The following image shows the HDR Test Pattern for
HLG EOTF
with
M-HDRZone
selected with an
SDR-
Max value set to 100NITs.