manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 133

Ultra XR User Guide

5–13

XR-56-201 5

Connections

Display Port Output Format

The DisplayPort output format and frame rate can be selected from 

the 

drop down list of frequently used formats or by selecting 

settings icon to define specific formats and frame rates. 

Raster

 

defines the image size such as 1280x720, 1920x1080, 2048x1080, 3840x2160 

and 4096x2160.

Refresh

 

defines the frame rate and whether the format is interlaced or progressive.

Sampling

 

defines the video sampling format this used. Default is 10bit 4:2:2 YUV.

Set

 

applies the currently selected video format, frame rate and data sampling mode 

to the DisplayPort output.

Close

 

closes the Video Standards Editor without applying or saving the changes.

DisplayPort Output Timing

The timing of the DisplayPort output can be aligned to the system's 

genlock input using the Genlock Timing Editor. This allows the 

DisplayPort output to be advanced/delayed using 

Pixel

 and 

Line

 

values. Selecting the 

OK

 button will apply any changes made.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands