OmniTek Ultra XR, User Manual

Page: 124 / 184

5–4 XR-56-201 5 Connections 03/18
Connections
Basic Operation
Select “Connec � ons”
tab to show this screen
Drag link from the Generator block node to
SDI Outputs block node to output test pa � ern
or sequence
Select Generator output format
and frame rate using se � ngs icon
Select the physical output(s) to
use from drop down lists
Drag link from the SDI Inputs
block node to the Analyser /
Convertor block node to enable
instruments in “Viewer”
Drag link from the Local User Interface block
node to the HDMI Output block node to
view the user interface on an HDMI monitor
Select the physical input (s) to
use from drop down lists
Making Links between Blocks
Links are made by clicking on the output node of one connection block, dragging the link to the input
node of another block then letting go.
Output Nodes Input Nodes
Connection Blocks
1
2
Fixed Link
Links are made by clicking on
the output node

of one
connection block, dragging the link
to the input node

of another
block then letting go.
Note that fixed links are dark blue
in colour to identify them.