OmniSwitch os6900, Network Configuration Manual, Page: 817 / 942

Configuring Learned Port Security Displaying Learned Port Security Information
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 31-17
Displaying Learned Port Security Information
To display LPS port and table information, use the show commands listed below:
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide . An example of the output for the show port-security, show port-security
learning-window and show violation commands is also given in “Sample Learned Port Security Configu-
ration” on page 31-3 .
show port-security Displays Learned Port Security (LPS) configuration and table
entries.
show port-security learning-window Displays the amount of time during which source learning can
occur on all LPS ports.
show violation Displays the address violations that occur on ports with LPS
restrictions.