OmniSwitch os6900, Network Configuration Manual, Page: 293 / 942

Configuring MVRP MVRP Defaults
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 12-3
MVRP Defaults
The following table lists the defaults for MVRP configuration.
Parameter Description Command Default Value/Comments
Enables or disables MVRP globally
on a switch. mvrp disabled
Enables or disables MVRP on spe-
cific ports mvrp port disabled
Maximum number of VLANs mvrp maximum-vlan 256
Registration mode of the port mvrp registration normal
Applicant mode of the port mvrp applicant active
Timer value for join timer. mvrp timer join 600 milliseconds
Timer value for leave timer. mvrp timer leave 1800 milliseconds
Timer value for leaveall timer. mvrp timer leaveall 30000 milliseconds
Timer value for periodic timer. mvrp timer periodic-timer 1 second
Restrict dynamic VLAN registration mvrp restrict-vlan-registration not restricted
Restrict VLAN advertisement mvrp restrict-vlan-advertise-
ment not restricted
Restrict static VLAN registration mvrp static-vlan-restrict By default, ports are assigned
to the static VLAN based on
MVRP PDU processing.