39
Thermal Camera
Sensor Type
Thermal Resolution
Spectral Response
Drift Compensation
Thermal Accuracy
Measurement Range
Sensitivity
Horizontal Field of View
Colour Camera
Sensor Type
Day Resolution
Horizontal Field of View
General
Frame Rate
Contrast
Brightness
Isotherm Colour Display
Temperature Trigger/Threshold
Febrile Tracking
Zoning
Masking
Alarm
Storage
Recording Output
USB Connector
Input Voltage
Operating Temperature
Storage Temperature
Installation Options
Amorphous Silicon (α-Si) microbolometer
384 X 288
7-14μm
Real time continuous calibration (ext. TRS)
±0.18°F / ±0.1°C
86°F to 113°F / 30°C to 45°C
≤50mK
Nominal 24.6°
CMOS 1/3” Sensor
2688 x 1520 4MP
Digitally synchronized to thermal image
Up to 50FPS
Automatic
Automatic
Pseudocolour specifically for fever screening
User defined temperature trigger threshold
Yes (Synchronized dual sensor tracking)
Yes
Yes
Audio visual with intelligent febrile tracking
U3 Micro SD Card (Up to 256 GB) or/and NVR
1080p (Recommend U3 Micro SD Card or USB 3.0)
USB 3.0 x 1, USB 2.0 x 2
110 – 230V AC
60°F to 91°F / 16°C to 33°C
-40°F to 185°F / -40°C to 85°C
Wall Mounted, Ceiling Mounted or Mobile Pedestal
10 - Specifications
Note:
1. Due to our policy of continual improvement, specifications may change without prior notice.
2. System must not be used in replacement of human observation.
Disclaimer:
The Sentry MFSS is not marketed or intended to be used as a medical device. This device does not determine
the core body temperature of subjects. Actual core body temperature can only be determined using an
approved clinical measurement device. For proper and effective use of Sentry MFSS, contact us.
Part No: SM4-OMS-384
