Operation Parameters Setting
GPRS connection
In the «Settings» tab select the «Connection» section from the list.
In the «GPRS Setup» section:
“Access Point Name (APN)” – enter the GPRS access point name
For GPRS access point names of other operators, refer to the mobile network operator,
whose SIM card is inserted in the terminal.
“Phone number” – number of the SIM card inserted in the terminal.
“APN Login” and “APN Password” – if necessary, enter login and password for APN
access point. Login and password are provided with the SIM card of a number of
mobile network operators.
Connection to Communication Servers
Terminals support data transmission to two Communication Servers (CS) through
Omnicomm and EGTS protocols.
In the “Settings” tab select the “Сonnection” section from the list.
In the “EGTS Protocol setup” section:
When setting up EGTS data transmission, you must use the TID terminal identification.
If the settings are not configured, when transmitting data through EGTS protocol ID
Omnicomm will be used for terminal identification.
In the “Settings of connection to the communication server” sections:
Operation Parameters Setting
Omnicomm OKO video terminal
16