7-2
Drawers
Bin Configuration
1-, 2-, 3-Cell Color Touch Installation and Service Guide
/67-2014 Rev G
© 2011 Omnicell, Inc.
Bin Configuration
Unlit Matrix Drawers
Each
can contain a maximum of 96 bins (24 in each quadrant). Customers
can utilize the flexibility of this drawer and customize it to meet specific needs and requirements
for the site. As with other matrix drawers, the
are designed to be snapped off, enabling the
bins to be custom-configured to fit site-specific needs.
Figure 7-1.
Matrix drawer dividers
1. Make sure that the layout of each drawer has been approved by the customer before installing
the dividers.
2. Break the divider tabs according to the customer design and trim away excess plastic to ensure
a snug fit in the drawer.
3. Add the dividers to the bin liner. The dividers should snap into the bottom of the drawer and
the sides of each bin liner quadrant.
4. Use the gray circular labels provided with the kit to cover any un-used divider slots in the bin
liner.
Note:
Dividers must be placed into the drawer in a specific order with each divider in a specific slot, so
separating the dividers by part number is recommended.
Note:
It is recommended that a drawing be made of each drawer, showing the customer’s preferred
configuration for each quadrant of a given drawer.
