OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
6-10
Front Panel Operations
2.
a. In the
Operate Functions
menu,
select
Edit MF
.
b. Press
OK
.
3.
a. Use the
Right
or
Left
arrow keys to
select the Meter Run (at the top of the
screen) for which you need to update
the Meter Factor.
b. When the correct Meter Run is
selected and the
Enter MF
line is
highlighted, press
OK
.
4.
a. When the
Enter MF
field becomes
active, use the number keys to enter
the new Meter Factor.
b. When finished, press
OK
or the
Accept
function key to save your
changes.
5.
Use the
Right
or
Left
arrow keys to select
a different Meter Run at the top of the
screen to edit other Meter Factors or press
the
Home
or
Back
keys to return to the
Operate Functions
menu.
6.6.2 Edit Density Correction Factor
To edit the Density Correction Factor (DCF), follow these instructions:
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Operate.
b. Press the
OK
key.
