OMNI mount TVM-13 Assembly Instructions Download Page 1

 

4  

Specifications are subject to change without prior notice. 

Every effort has been made to provide accurate and error-free assembly and installation. OmniMount Systems disclaims 
liability for any difficulties arising from the interpretation of information contained in these instructions. If OmniMount 
products are used for purposes other than their original intent, OmniMount, its distributors and retailers shall not be 
held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise from the 
inability to use this product safely, properly, and in the manner for which it has been designed and manufactured. 

Thank you for purchasing an OmniMount product. 

Step 6 

Place platform trim piece (14) over front lip of platform. 

 
Hold trim piece in place with your fingers while using 

thumbs to spread locking tabs out and down, until they lock 
in place underneath the platform. 

Step 7 

Thread open end of security strap (19) up through 

a slot on the outer edge of platform, across the 
platform, and then down through the other slot. 
Place self-adhesive anti-slip pads (8) on platform. 

 

Place TV squarely onto platform. 
Pull two ends of security strap over TV, thread 

strap ends through strap buckle (as shown), and 
secure tightly.  

Step 8 

Adjust platform for desired amount of tilt: 
 

To increase tilt angle, hold top of TV and carefully push front edge of 

platform backwards. 

To decrease tilt angle, hold top of TV and carefully pull front edge of 

platform forwards. 

 

With tilt angle set, turn front edge of platform at right angles 

to support arm. Insert small hex wrench through holes in 
bottom of platform support as shown, and tighten 
platform tilt screws securely. 

Step 9 

Press nose piece (4) into place at end of support arm, as shown. 

OmniMount Systems, Inc. 

8201 South 48th Street • Phoenix, AZ 85044-5355 

1-800-MOUNT-IT • www.omnimount.com 

P/N 1002759—Rev. B  4/2005 

 

   

TVM-13 Television Wall Mount 

Assembly Instructions 

◊ 

TVM13 designed for: 9” - 13” CRT Televisions 

◊ 

TVM13Maximum Weight Capacity: 60 lbs. (27.2 Kg)

 

 

• 

TV platform tilts and swivels

 

• 

Wall arm pivots 

• 

Black security strap included

 

• 

Accepts optional Component Mount

 

IMPORTANT: Consult a qualified installer if you have any questions 
regarding the proper installation of this wall mount system. 

Questions? 1-800-MOUNT IT 

Reviews: