Omicron CPC 100, Reference Manual

Page: 310 / 382

CPC 100 V1.41
14 - 10
Preparing a Test Offline with a PC
Outline of a typical proceeding for an offline test preparation with a PC using
CPC Explorer and CPC Editor .
– Start CPC Explorer.
– Use CPC Explorer ’s shortcut menu item N
E W
F
O L D E R
to create a folder for
the new test on your local hard disk. Name the folder accordingly, for
example,
CPC Tests
.
If this new folder is to be situated at the drive’s root, for example, right
underneath
C:\
, use Windows Explorer to create it. CPC Explorer does not
create folders right underneath the root level.
– Right-click on that newly created folder, here:
C:\CPC Tests
, and use the
shortcut menu item N
E W
F
O L D E R
to create subfolders in a tree structure
that corresponds with the substation:
Figure 5:
Representation of the
substation "Sulz" with its
two 3-phase feeders
"Klaus" and "Roethis" in
a folder tree structure
– Start CPC Editor
– Set up the required test card(s) for this substation, compose your entire test,
and eventually save the test in the appropriate folder that you created with
CPC Explorer .
– If single test cards or entire tests are similar or even identical, use CPC
Explorer’s and/or CPC Editor ’s copy/paste functionality, rather than creating
new tests from the beginning.