OMICRON
11
Introduction
2
Introduction
2.1
Designated use
2.1.1
CPC 100
The
CPC 100
, with its accessories or as a stand-alone unit, is a multi-purpose primary test set for
commissioning and maintaining substation equipment. It performs current transformer (CT), voltage
transformer (VT) and power transformer (TR) tests and is used for contact and winding resistance
testing, polarity checks, and for primary and secondary protection relay testing.
2.1.2
CPC 80
The
CPC 80
is a control unit based on the
CPC 100
hardware concept. In contrast to the
CPC 100
the
CPC 80
only comes with the booster output. It is not equipped with any measurement inputs or directly
usable outputs and therefore intended for use with
CPC
accessories for testing.
Currently the
CPC 80
is used in the following combinations:
• With the
CP TD
for dissipation/power factor testing
• As slave unit with a
CPC 100
as master
As mentioned above, dedicated accessories are required to allow for dedicated testing. The
synchronization of
CPC
devices affects various applications as it allows for increased testing power.
2.2
Options for operation
► The
CPC 100
and
CPC 80
can be operated via either the front-panel control or
Primary Test
Manager
.
Summary of Contents for CPC 100
Page 1: ...CPC Getting Started...
Page 20: ...CPC Getting Started 20 OMICRON...
Page 22: ...ENU 1194 03 04...