Omicron CMC 310, User Manual

Page: 26 / 44

CMC 310 User Manual
26 OMICRON
Power diagram for 3-phase operation
Power diagram for single-phase operation
Section 5.2 "Voltage outputs" on page 39
4.4.4 Low-level binary outputs (ext. Interf.)
The SELV interface connector ext. Interf. holds 4 additional transistor binary outputs
( BINARY OUTPUT 11–14). Unlike regular relay outputs, BINARY OUTPUT 11–14 are bounce-free
binary outputs and have a minimal reaction time.
In addition, 2 high-frequency counter inputs for up to 100 kHz are available for the testing of energy
meters. They are described in section 4.5.2 "Counter inputs 100 kHz (low level)" on page 32.
Pin assignment of the external interface ext. Interf. (upper 16-pole LEMO socket); view onto the
connector from the cable wiring side:
Output voltage in V
Output
power
per
phase
in
V
A
typical
guaranteed
Output voltage L-N in V
Output p
ower in VA
Single-phase operation L-N
Output voltage L-L in V
Output pow
er in VA
Single-phase operation L-L
typical
guaranteed
typical
guaranteed