7.4.2 Software Update page
Current version
Displays the version number of the software currently installed on
OTMC 100
.
New image file
Click the
Browse...
button to navigate to the software image file. The path
and file name is displayed in the field after selecting it in the file open
dialog.
Keep settings
If this check box is selected, the user specific configuration settings are kept
during a software update. Deselect the check box to automatically reset the
device configuration to the factory defaults after a software update.
Update
button
Click the
Update
button to start the software update. The update process
may take up to ten minutes. Do not disconnect
OTMC 100
or the computer
during this process.
OTMC 100
automatically restarts after the software update completed.
If the software update process fails due to any reason,
OTMC 100
will enter a recovery
mode on the next power-up. In this mode, the device provides only a rudimentary web
interface (similar to the
Software Update
page) just allowing for the upload of a software
image.
The OTMC 100 web interface
OMICRON
79
