7.3.6 SNMP configuration page
Configuration via the Simple Network Management Protocol (SNMP) is only possible for the Power
profile settings (as defined by IEEE C37.238-2011 MIB) of
OTMC 100p
. No other settings can be
configured via SNMP.
Use this page to configure the access via the Simple Network Management Protocol (SNMP). Click
the
Save All
button to save and apply your SNMP configuration specified in the individual tabs to
OTMC 100
.
A MIB file is required for proper representation of
OTMC 100
settings in SNMP clients. Refer
) of the
Tools
section to download the MIB file
from
OTMC 100
.
7.3.6.1
Access pane
Read community
Use this field to specify the community name for read access. SNMP clients
of this community can obtain read access to
OTMC 100
.
Read/write community
Use this field to specify the community name for read and write access.
SNMP clients of this community can obtain read and write access to
OTMC 100
.
The OTMC 100 web interface
OMICRON
75
