Omicron Lab CT Analyzer, User Manual

Page: 199 / 254

5
Preface
Preface
Using This Manual
This CT SB2 User Manual provides information on how to use the CT SB2
switch box. The CT SB2 User Manual contains important safety instructions for
working with the
CT SB2 , gets you familiar with operating it, and provides typical
application examples. Read and observe the safety rules described in "Safety
Rules" on page 7 and all relevant instructions for installation and operation.
Following the instructions in this User Manual will help you to prevent danger,
repair costs, and avoid possible down time due to incorrect operation.
The CT SB2 User Manual always has to be available at the site where the
CT SB2 is used. It must be read and observed by all users of the CT SB2 .
Reading the CT SB2 User Manual alone does not release you from the duty to
comply with all relevant national and international safety regulations.
Operator Qualifications and Safety Standards
Working on high-voltage power equipment can be extremely dangerous.
Testing with the CT Analyzer and the CT SB2 switch box should only be carried
out by authorized and qualified personnel. Before starting to work, clearly
establish the responsibilities.
Personnel receiving training, instruction, direction, or education on the
CT Analyzer and the CT SB2 should remain under the constant supervision of
an experienced operator while working with the equipment.
The operator is responsible for the observance of all applicable safety
requirements during the entire test. When performing tests in high-voltage
areas, pay attention to the national and international standards for safe
operation of high-voltage test equipment (EN 50191, IEEE 510, and others).
Moreover, observe all applicable regulations for accident prevention in the
country and at the site of operation.