Omicron Lab CT Analyzer, User Manual

Page: 17 / 254

15
Introduction
Note: Please refer to the following sections for more information:
• Section 2.3 on page 23 for information on how to connect the CT Analyzer to
a PC.
• Chapter 5 on page 59 for general information on how to operate the
CT Analyzer .
• Section 5.7 on page 65 for more detailed information about the
Setting Menu page.
1.2.5 Inputs and Outputs
Figure 1-5 Inputs and outputs of the CT Analyzer
Warning: While the red LED of the key is flashing, voltage is applied at
the output and the measurement inputs.
I/0
Output
Generator output.
AC: 40V
rms
, 5A
rms
DC: 120V, 15A
Sec
Measurement input for secondary side of CT,
150V
AC
max., 500k Ω input impedance
Prim
Measurement input for primary side of CT,
30V
AC
max., 150k Ω input impedance