13 |
P a g e
Customize Device Settings
To customize the device settings of your transmitter, click the
Device Settings
Configuration Tab.
Sensor Setting
Transmission Interval must be set by the ZW-REC and controls the
frequency that readings are sent from the transmitter to the
receiver.
XW Transmitter Network Setting
This section allows you to change the PAN ID/Network ID and
the Device ID of the XW Transmitter separate from the Add
Device Wizard.
System Functions
•
Reset User Hours:
Resets the operation hours of the
XW
Transmitter as displayed in SYNC.
•
Update Current Time:
Changes the XW Transmitter’s internal
clock to sync with the clock of the computer it is connected to.
Important:
Click
Update Current Time
when setting up the
XW Transmitter for the first time to ensure accurate date
and time are reflected in the data logging.
•
Factory Reset:
Resets the XW Transmitter to its factory settings.
•
Load Configuration:
Allows the user to load a configuration file (.json) from the computer the XW Transmitter is
connected to.
•
Save Configuration:
Saves the current configuration set for the XW Transmitter into a .hex file.
•
Reset ID:
Allows the user to reset the Network ID and the Device ID of the XW Transmitter through the XW Transmitter
Onboarding Wizard.
•
Firmware Update:
Allows the user to load a firmware update
file (.hex) from the computer the XW Transmitter is
connected to.
•
Rename Device:
Allows the user to change the name of the XW Transmitter.
Figure 19
