Series TCL-3M165E2
Operation
Technical changes reserved
- 45 -
5.7.2 Measurement reports
Here, you can select saved data of testing processes and have them displayed. The
measurement log is saved under the name of the testing process. Several measurement logs
can have the same name, if a testing process was carried out at different times.
From the main window, you get to the window "Select measurement report".
Information on the selected measurement log is
displayed in the information box.
All the measurement logs of the calibrator are
displayed in the selection list.
The measurement logs can be sorted, deleted,
exported or displayed from the toolbar.
Select the desired measurement log by tapping on
in the selection list.
The information on the measurement log is immediately displayed in the information
box.
Delete measurement report:
On tapping the
icon, the selected measurement log is immediately deleted.
Export measurement report:
Tap on the
icon to export the selected measurement log.
Follow the instructions on the screen.
Show measurement report:
Confirm your selection with the
icon.
The window for displaying the measurement logs
is opened and the data of the selected
measurement log are loaded.
Move the scrollbar below the measurement value
range to move the time axis of the recording.
The relevant measurement data are displayed in
the measurement value range. The temperature
axis is scaled automatically.
Tap on the (+/-) symbols next to the measurement
value range to change the scaling of the time axis.
