![background image](http://html1.mh-extra.com/html/omega/tcl-3m165e2-series/tcl-3m165e2-series_user-manual_4189795041.webp)
Series TCL-3M165E2
Operation
Technical changes reserved
- 41 -
5.7 Calibrator settings
The most important windows for the setting of the calibrator are described in the following
sections.
5.7.1 Calibrator Set Up
In the "Calibrator Set Up" window, the settings of the calibrator are displayed and the
parameters are changed.
The window has two pages. You can switch between the two pages with the parameter fields
" next" and " back".
By using the parameter fields of the "Calibrator Set Up" window, you can get to the windows
of the parameters. There, the relevant information is displayed or the parameters are
configured.
Parameter fields of the "Calibrator Set Up" window
System information:
The most important data of your calibrator is
displayed. These data are the calibrator type, the production
date, the version of the software, the serial number, the
operating hours (total / since the last calibration) and the
calibration date.
Language selection:
The current language is indicated in the information
box. All the installed languages of the calibrator can be seen
in the selection list.
Select the desired language by tapping in the
selection list.
Confirm your selection with the
icon.
The selected language is adopted and you will be returned to the "Calibrator Set Up"
window.