Omega OTEC IEMP-D Series, Technical Manual, Page: 77 / 95

111
there is no water in the drain pan). Dismantle the drain pan according to the following schematic to prevent
water leakage in the unit.
Front
beam
Drain pan
assembly
Drain pan
assembly
Drain pan
assembly
Drain pan
assembly
Top cover plate
assembly
Figure a: Dismantle the top cover plate
assembly
Figure b: Rotate the drain pan assembly
by 30 to 45 degrees around the front
horizontal beam
Figure c: Shift the drain pan assembly
to the left by more than 30 mm
Figure d: Shift the drain pan
downwards until the drain pan is
removed from the unit body