Omega ORC916MB, Instruction Manual

Page: 10 / 13

10
Cleaning and Maintenance
General Maintenance
Switch off the rangehood before cleaning or maintenance.
To prevent surface damage never use abrasive or oil-based liquid cleaners. To clean the surfaces of the
appliance, use mild detergent and warm water. In areas of high humidity and coastal environments cleaning
should be carried out frequently.
Warning : Oil will build-up in the oil collector & must be emptied periodically.
Filter Maintenance
The stainless-steel filters do not generally need removing and cleaning. All oils should collect in the oil
collector. If excess oil can be viewed on the outside of the filter, clean off using paper towels. The filter can
be removed if necessary by removing the two screws at the front of the filter.
Removal of Oil Collector
To remove the oil collector, grip at both ends and carefully lever forward to unclip it from the corners. Take
care to keep the oil collector level so that oil does not spill out. The centre of the oil collector has a viewing
window; empty when the level reaches the half-way line. Once emptied, rinse with hot soapy water and
reclip into place.
Replacement of LED Lamps
The LED lamps cannot be replaced by the consumer. If any faults occur, please ring your nearest Service
Department.