background image

 

 

Important Safety Warnings 

IMPORTANT:

 Read the assembly instruction section and safety precautions of this booklet carefully before 

removing the contents of this carton. 
1.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental  capabilities,  or  lack  of  experience  or  knowledge,  unless  they  have  been  given  supervision  or 

instruction concerning the use of the appliance by a person responsible for their safety.  Children should 

be supervised to ensure that they do not play with the appliance.   

2.  After removing the packaging, make sure to check if there is any damage to the appliance. If there is any 

damage,  never  attempt  to  install  the  appliance  and  immediately  contact  your  retailer.    As  packaging 

materials can be dangerous to children, they need to be collected immediately and put out of reach. 

3.  In certain circumstances electrical appliances may be a safety hazard.  Check the conformity of voltage 

and  power  settings,  which  are  specified  on  the  information  plate  attached  to  the  appliance  and/or 

packaging, with the usage conditions available. 

4.  Do not place heavy objects in or on these appliances, use for storage or as a cutting surface as sharp 

edges can damage the surface.  This appliance is designed for cooking food only.  Use flat based, stable, 

inductive cooking rated cooking vessels only. 

5.  This  appliance  is  designed  for  domestic  household  use  only  and  for  the  cooking  of  domestic  food 

products.  Use as a commercial appliance will  void the warranty. It should not to be used in a marine 

environment or outdoors and must be fully built in.  Do not use the appliances until fully installed. 

6.  Means  for  disconnection  with  a  suitable  -  isolating  switch  must  be  incorporated  in  the  fixed  wiring  in 

accordance with the wiring rules. 

7.  The appliance is not intended to be operated by means of an external timer or separate remote-control 

system. 

8.  Electrical  connection  must  be  made  as  per  local  wiring  rules  and  regulations.    Do  not  disconnect  the 

appliance with wet hands or bare feet, and do not disconnect the power cord with extreme force.  

9.  Ensure  that  the  kitchen  is  well  ventilated  or  mechanical  ventilation  is  in  use  while  cooking  on  this 

appliance.  

10. Do  not  store  or  use  flammable  materials  or  aerosols  near  the  cooktop.    Items  made  from  aluminium, 

plastic, plastic film & sugar-based foods should also be kept away from the appliance, as they may fuse to 

the surface. 

11. WARNING – The surface temperature of this appliance exceeds 95°C.  To avoid a hazard, under bench 

access must be restricted.  A board must be installed underneath the cooktop. Heat from the underside of 

the unit will be expelled by inbuilt fans – do not block. 

12. WARNING - The cooktop will become hot during and directly after use.  Do not touch the surface during 

this time, as it may be hot and can cause burns.  To avoid burns, children should be kept away.   

13. Cleaning may only be commenced on the appliance once it has cooled down and is turned off.  Failure to 

clean  properly  can  damage  the  unit.   Do  not  use  a  steam  clean,  steam  jet  or  any  other  high-pressure 

cleaning equipment to clean the appliance.  

14. When the appliance is not being used, turn the appliance off. 
15. Do not modify this appliance.  
16. Do  not  use  harsh  abrasive  cleaners  or  sharp  metal  scrapers  to  clean  the  glass  surface  as  they  can 

scratch the surface, which may result in the glass shattering.  Clean the glass using a warm damp cloth 

(e.g. dishcloth) and dry it with a soft dry tea towel. 

 

 

Summary of Contents for OCI64


















Reviews: