background image

 

 

 

 

 

 

Appliance Details 

Electrical Details 

Model: 

OBO654TGG 

Rated Voltage: 

220-240V ~50Hz 

Rated Power Input: 

1800-2200W 

Supply Connection: 

10A Plug 

This information can be found on the rating plate (data label) affixed to the inside of the door jamb. 

Dimensions 

LENGTH (mm) 

WIDTH (mm) 

HEIGHT (mm) 

595 

570 

595 

Electrical Connections 

LOCAL AUTHORITY REQUIREMENTS 

Installation is only permitted by a licensed electrician, and carried out according to instructions 

provided by the manufacturer. Incorrect installation might cause harm and damage which the 

manufacturer accepts no responsibility. 

ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN 

This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 10A plug. 

Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the 

appliance identification plate) must be checked for correspondence to the available mains supply voltage, 

and the mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance 

identification  plate); 
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations. 
This appliance must be plugged into a 10A switched outlet. It should not be located above the appliance 

and no more than 1.25m away from it. The power supply cord must not touch against any hot surfaces and 

must be placed so that its temperature does not exceed 75°C at any point along its length. 
After having installed the appliance, the switched outlet must always be in an accessible position. 
NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points 

as these may overheat and catch fire. 
The mains terminal block is located on the back of the oven and the terminals are accessible by opening 

the terminal block cover. Note: The terminal cover should not be opened when the mains power is still 

connected to the appliance and never by an unauthorized person. 

The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed. 

The manufacturer declines all responsibility for damage resulting from an installation which has not been 

earthed correctly. 
The use of adapters, multiple sockets and/or extensions, is not allowed. 

 

 

Summary of Contents for OBO654TGG

















Reviews: