background image

 

 
 
 
 
 

Important Safety Warnings 

IMPORTANT

: Read the assembly instruction section and safety precautions of this booklet carefully before removing the 

contents of this carton. 

1.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction 
concerning the use of the appliance by a person responsible for their safety. Children should be supervised to 
ensure that they do not play with the appliance. 

2.

 

In certain circumstances electrical appliances may be a danger hazard. 

3.

 

Do not place heavy objects in or on these appliances, or use for storage, or let children play or swing from the 
door. These appliances are designed for cooking food only. 

4.

 

This appliance is designed for domestic household use only and for the cooking of domestic food products. Use 
as a commercial appliance will void the warranty. It should not to be used in a marine environment or outdoors. 

5.

 

This appliance is supplied with a 10-amp plug.  

6.

 

If the electrical supply cord is damaged, either when being installed or after installation, it must be replaced by 
the manufacturer, its service centre or similarly qualified persons in order to prevent a hazard. 

7.

 

The electrical connection must be accessible after installation. The appliance must be electrically isolated 
before any maintenance can be performed, which includes changing a lamp. 

8.

 

Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance 
with wet hands or bare feet, and do not disconnect the power cord with extreme force. 

9.

 

Always grasp the oven door in the centre of the handle as the areas around the door edges may be hot due to 
the escape of hot air. 

10.

 

Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking in this appliance. 

11.

 

Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or 
plastic film should also be kept away from the appliance, as they may fuse to the surface. 

12.

 

Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the 
cooking and even damage the enamel. 

13.

 

WARNING

 - The oven will become hot during and directly after use. Do not touch any components during this 

time, as they may be hot and can cause burns. Do not touch the heating elements inside the oven to avoid 
burns. Children should be kept away. Use heat resistant cooking gloves where-ever possible when moving food 
and cooking utensils in and out of the oven. 

14.

 

Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The 
appliance should be disconnected from the power outlet or turned off at your isolation switch before 
commencing any cleaning process. Do not use a steam jet or any other high-pressure cleaning equipment to 
clean the appliance. Follow oven cleaner directions if these are being used. 

15.

 

Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel. If you use your 
oven for an extended period of time, condensation may form. Dry it using a soft dry cloth. 

16.

 

When the appliance is not being used, the knobs must be kept in the ‘OFF’ position. 

17.

 

Where this appliance is installed in a caravan, it shall NOT be used as a space heater. 

18.

 

Do not modify this appliance. 

19.

 

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass as it can scratch the 
surface, which may result in the glass shattering. Clean the glass door using warm damp cloth and dry it with a 
soft cloth. 

20.

 

All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 50°C 
above the ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate 
kitchen furniture are particularly prone to heat damage or discolouration at temperatures outside the guidelines 
given above. Any damage caused by the appliance being installed without adhering to the temperature limits set 
out above will be the liability of the owner. 

21.

 

This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the 
manufacturer’s instructions. Please see the specific section of this booklet that refers to installation. 

22.

 

The appliance must be installed and put in operation by an authorised technician under the conditions provided 
by the manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might 
occur due to faulty installation. 

23.

 

The values indicated on the printed documents found on the product are values obtained in laboratory 
environment according to relevant standards. These values may vary according to the usage and environment 
conditions of product. 

 

 

Summary of Contents for OBO61PX
























Reviews: