M20011 REL-0000 (2103)
User Manual for Smart Manometer
19 of 60
Overrange condition
During an error or overrange condition, the red backlight
overrides
the white backlight.
However, once the error or overrange condition is corrected, the
white backlight is restored to its previous state (if the backlight
Auto Off
timeout did not expire).
Measurement units
A measurement unit doesn’t display
If a given measurement unit cannot display the correct number of
digits, the Smart Manometer automatically advances to the next
displayable unit.
Note: When you turn on the Smart Manometer, it defaults to the
last selected measurement unit or P2.
Measurement units are stored on a sensor
The HHP400 Suite application gives you the ability to configure
specific measurement units on specific sensors.
A total of 32 measurement units are available in HHP400 Suite.
When the Smart Manometer is shipped, 12 measurement units are
active. The 12 units appear in
bold type
in the following list.
Standard Measurement Units (non-custom)
1.
PSI
12.
CMW4C
23.
KG/M2
2.
INW20C
13.
CMW60F
24.
PA
3.
INW4C
14.
MW2OC
25.
HPA
4.
INW60F
15.
MW4C
26.
KPA
5.
FTW2OC
16.
MW60F
27.
MPA
6.
FTW4C
17.
INHG0C
28.
BAR
7.
FTW60F
18.
MGH0C
29.
MBAR
8.
MMW20C
19.
CMGH0C
30.
ATM
9.
MMW4C
20.
MMHG0C
31.
OZ/IN2
10.
MMW60F
21.
TORR
32.
LB/FT2
11.
CMW2OC
22.
KG/CM2
