manualshive.com logo in svg

Omega DP400TP, User Manual, Page: 32 / 60

Share
Download
Omega DP400TP User Manual Download Page 32

32 - 

DP400S - User manual

Press

Display

Do

6

“Sel” to enter 

the parameter 

modification

Shows all parameter 
possible selections or the 
parameter numeric value. 

Press “

n

” and “

m

” to modify 

parameter. For numeric 
parameters, pressing “



” 

it is possible to modify 
digit-to-digit. Press “Sel” to 
confirm modification. Press 
“<-” to exit without modify.

12.2 Loading default values

Enter password 9999 to restore factory settings of the device. Entering password 
9911, at next restarting will be required only the language selection.

12.3 Configuration by NFC/RFID

Quick device setup by 

Direct  Link

 app (only for Android®) on smartphones 

provided with NFC. The app is available for download on Google® PlayStore.

Position of the NFC/RFID antenna for 
communication with smartphone and 
reading / writing of data. 

Configuration can also be done with device switched-off. If this operation is 
done with device switched-on, display will show a restarting message.

Summary of Contents for DP400TP





























































Reviews:

No comments