PLATINUM
TM
Series User’s Guide
31
Reference Section: Initialization Mode (INIt)
Navigate to the desired setting. Settings include the following:
•
8bIt
– 8 bits used per data character (factory default)
•
8bIt
– 7 bits used per data character
Select the indicated option.
4.4.3.5
Stop Bits (INIt > CoMM > SER > C.PAR > StoP)
Select the number of Stop Bits (
StoP
).
Navigate to the desired setting. Settings include the following:
•
1bIt
– 1 stop bit (factory default)
•
2bIt
– 2 stop bits (provides a “force 1” parity bit)
Select the indicated option.
4.5
Safety Features (INIt > SFty)
Select Safety Features (
SFty
).
Navigate to the desired parameter. Parameters include the following:
•
PwoN
– Requires confirmation before running automatically at startup
•
oPER
– User must select
RUN
when exiting from the
Stby
,
PAUS
, or
StoP
Modes
•
SP.LM
– Setpoint limits can be set to limit the values that can be entered
•
LPbk
– Loop break enable/disable and timeout value
•
o.CRk
– Open circuit detection enable/disable
Select the indicated option.
4.5.1
Power On Confirmation (INIt > SFty > PwoN)
Select Power On Confirmation (
PwoN
).
Navigate to the desired setting. Settings include the following:
•
dSbL
– Program runs automatically at startup (factory default)
•
ENbL
– The unit powers on and then displays
RUN
; press the ENTER button to run
the program
Select the desired setting.
4.5.2
Operating Mode Confirmation (INIt > SFty > oPER)
Select the Operating Mode Confirmation
(oPER)
parameter.
Navigate to the desired setting. Settings include the following:
•
dSbL
– Pressing the ENTER button in
Stby
,
PAUS
, or
StoP
Modes will start running
the current program immediately (factory default)
•
ENbL
– Pressing the ENTER button in any Operating Menu Mode will display
RUN
;
pressing the ENTER button again will start running the current program
Select the desired setting.
4.5.3
Setpoint Limits (INIt > SFty > SP.LM)
Select Setpoint Limits (
SP.LM)
to set limits on the values that can be used for the all Setpoints.
Omega Engineering | www.omega.com
