11. Use and maintenance manual
B01.11
S. Maurizio C.se - 18/12/2020
www.omcr.it
5. MAINTENANCE
5.1
Every 6 months inspect visually the lifting brackets, paying particular attention to any evidence of
deformations or oxidation: in case restore or replace the lifting brackets.
5.2
Every 6 months check the correct clamp of the fixing screws in accordance with the table included in this manual.
5.3
Every 6 months check for the functionality of the rope-stop: the system must have the possibility to rotate
freely around the pin and the spring have to completely withdraw the rope-stop tab; if necessary reintegrate or
substitute the pointed pins.
5.4
In case of unforeseen settlements of lifting ropes with a following overload on the lifting bracket, make visual
tests on the lifting brackets to check eventual deformations and, in case of these last ones, substitute them;
substitute the fixing screws and check the correct clamp following the table indicated in this manual.
5.5
In case of accidental impacts in the sling-zone during the lifting and handling, make visual inspections on
the lifting brackets to check eventual deformations and, in case replace them; replace the fixing screws and
check the correct clamp in accordance with the table included in this manual.
Summary of Contents for B01.11
Page 13: ......
