6
Installation
MAIN CHARACTERISTICS OF THE TOOLS WHICH CAN BE INSTALLED IN THE
MACHINE
The machine is supplied with a plate - each hole of which has a diameter of 6/8 mm. To perform different
processing operations, however, it is possible to fit in plates with holes having a smaller diameter compared
with the plate supplied by the manufacturing company without modifying the functional characteristics of the
machine.
SETTING UP THE MACHINE
•
Fit the body into its seat in the motor assembly after partially unscrewing the hand wheel. Make sure that
the body has been fitted with the meat-supply opening turned up and that it has been driven into its seat
up to the end; lock into place by turning the hand wheel to the end without forcing the locking position too
much.
•
If the body has been properly assembled, it cannot be taken out or revolve in its seat.
•
Fit horizontally the screw in the body on the side of the grooved shaft driving it on the bush (a component
placed inside the body).
•
At this stage, if necessary, slightly rotate the screw so that the insertion of the clutch into the motor drive
will be made easier.
• Fit in sequence in the pin with the square dragging part jutting out from the screw: the grinding blade with
the cutting edge facing outside, and the perforated plate with the fat side facing the cutting edge of the
blade. When fitting in the blade, make sure that the square dragging part is properly inserted.
•
Check if the outside notch in the plate is positioned in connection with the special fastening tooth placed on
the body so that the plate cannot revolve once it has been fitted in the body.
•
Lock into position by screwing the threaded crown on the corresponding thread in the body; do not force
the locking position with any tool. Locking effected manually is enough.
•
After making sure that the motor switch is at 0, you can plug in.
•
The machine is now ready to work and you can start it by putting the motor switch/reversing switch to
Model
MG-IT-0032
Power
1.5 HP / 1.1 kW
Motor Size
1100 Watts
RPM
110
Throat Opening
2” approx.
Electrical
110 V / 60 Hz / 1 Ph
Weight
77 lbs. / 34.9 kg.
Dimension (DWH)
22.4” x 11” x 17” / 570 x 279 x 432mm
Item Number
11013
Technical Specifications
