21
400715D-EN
2.
Remove the
mixing tube
.
NOTICE
Remove the mixing tube BEFORE installing or removing the nozzle to prevent damage. Large upward
forces from an installed mixing tube can misalign the internal nozzle components.
3.
Hold the
inlet body
and loosen the
nozzle body
.
Figure 33
4.
Remove the
nozzle body
from the
motorized z-axis
.
For cleaning the nozzle assembly, go to
Clean and Examine the Nozzle Assembly
For cleaning or replacing the final filter assembly, go to
Clean or Replace the Final Filter
.
Remove the Nozzle Body from a Tilt-A-Jet
NOTICE
Handle the nozzle carefully to prevent damage to the abrasive tubing retention tube.
1.
Remove the
abrasive feed tube
from the
nozzle
and the
abrasive hopper
.
Figure 34
2.
Remove the
mixing tube
.
NOTICE
Remove the mixing tube BEFORE installing or removing the nozzle to prevent damage. Large upward
forces from an installed mixing tube can misalign the internal nozzle components.
Summary of Contents for MAXJET 5i 320303 Series
Page 32: ...32 400715D EN...
