8
Step 3:
1. Connect motor communication wire(11) and upright post communicationwire(12).
2. Attach upper upright post(4) to the main frame(1). Firstly take out the hole plug (102).
Lock with Allen flat head set-bolt (39). Then cover the hole with holeplug(102)
（
Notice: The screws on upright post need to be tightened together, when finished
tightening one screw, then start on the other screw in turn until tightened the upright post
）
3. Attached Axle(25) to the upper upright post(4).
Step 4:
1. Firstly, set the curve washer (103) to the both side of the Axle (25). Then
assembleBodyarm-L(5)totheleftofAxle(25).Bodyarm-R(6)totherightofAxle(25). Lock with
flat washer(31) and Allen C.K.S. full threadscrew(29).
2. Assemble Body arm cover (17) and Body arm cover (16) to the Body arm-left(5) with
Phillips pan head full thread screw(33).
3. Same as above way to assemble Body arm cover (17) and Body arm cover (16) to the
Body arm-right(6)
Summary of Contents for E30
Page 16: ...16 Drawing for assembly...
Page 17: ...17...
