Sequential shooting/using the self-timer
Adjust settings for burst or self-timer photography. Choose an option according to your subject.
Secure the camera firmly on a tripod for self-timer shooting.
Press the
g
Y
(
G
) button.
Highlight an option using
HI
or the control dial.
F
Single
One frame is taken at a time when the shutter button is pressed.
i
Sequential
High
Hold the shutter-release button all the way down to take a series of
photographs.
To select a frame advance rate, highlight [Sequential High] and
press the INFO button before you press the OK button. Select
from frame advance rates of approximately 10 frames per second
(10 fps) or 20 frames per second (20 fps). Use
FGHI
or the
control dial to highlight a frame advance rate and press the OK
button to select.
Flash is disabled.
h
Sequential
Low
Pictures will be taken at about 5 fps while the shutter button is
pressed all the way down.
j
Self-timer
12sec
Press the shutter button halfway to focus, then all the way down to
start the timer. First, the self-timer lamp lights up for approximately
10 seconds, then it blinks for approximately 2 seconds, and then the
picture is taken.
k
Self-timer
2sec
Press the shutter button halfway to focus, then all the way down
to start the timer. The self-timer lamp blinks for approximately 2
seconds, and then the picture is taken.
l
Custom Self-
timer
Press the INFO button to set [
Y
Timer], [Number of Frames], and
[Interval Length]. Use
HI
to highlight items and
FG
to select a
value. Focus, exposure, and white balance are fixed at the values for
the first shot of each series.
60
Sequential shooting/using the self-timer
C
C
1.
2.
