OM SYSTEM OM-1 Mark II, Instruction Manual, Page: 500 / 566

Error codes
Monitor indication Possible cause/Corrective action
No Card
The card is not inserted, or it cannot be recognized.
Insert a card. Or reinsert the card properly.
1
Card Error
There is a problem with the memory card in Slot 1.
Remove and reinsert the memory card. If this does not solve the problem,
format the card. If formatting fails, the card cannot be used.
2
Card Error
There is a problem with the memory card in Slot 2.
Remove and reinsert the memory card. If this does not solve the problem,
format the card. If formatting fails, the card cannot be used.
1
Write Protect
The memory card in Slot 1 is write-protected (“locked”).
The memory card write-protect switch is in the “LOCK” position. Return the
switch to the unlocked position (
P.34 ).
2
Write Protect
The memory card in Slot 2 is write-protected (“locked”).
The memory card write-protect switch is in the “LOCK” position. Return the
switch to the unlocked position (
P.34 ).
1
Card Full
Shooting disabled; the memory card in Slot 1 is full.
Insert another memory or delete pictures.
Before deleting pictures, be sure any pictures you wish to keep have been
copied to a computer.
Choose a different option in
[
K
Card Slot Settings] (P.388) .
2
Card Full
Shooting disabled; the memory card in Slot 2 is full.
Insert another memory or delete pictures.
Before deleting pictures, be sure any pictures you wish to keep have been
copied to a computer.
Choose a different option in
[
K
Card Slot Settings] (P.388) .
500
Error codes