
Setting the card to record to (
K
Card Slot
Settings /
n
Card Slot Settings)
P A S M B
n
When there are cards in both slots 1 and 2, you can select which card to record still images and movies
to.
Super control panel
OK
U
K
Save Settings
Menu
MENU
U
e
U
1. Card/Folder/File
U
K
Card Slot Settings
MENU
U
e
U
1. Card/Folder/File
U
n
Card Slot Settings
Configuring [
K
Card Slot Settings]
K
Save
Settings
Choose the recording method for still images (
).
[Standard] / [Auto Switch] / [Dual Independent
5
] / [Dual Independent
6
] /
[Dual Same
5
] / [Dual Same
6
]
K
Save
Slot
Choose the card used to record photographs. This option takes effect when
[Standard] or [Auto Switch] is selected for [
K
Save Settings].
[Slot 1]: Photographs are recorded on the card in slot 1.
[Slot 2]: Photographs are recorded on the card in slot 2.
q
Slot
Choose the card used for still image playback when [
K
Save Settings] is set to
[Dual Independent
5
], [Dual Independent
6
], [Dual Same
5
], or [Dual Same
6
].
[Slot 1]: Photographs on the card in slot 1 are played back.
[Slot 2]: Photographs on the card in slot 2 are played back.
You can also choose a card for playback using the
q
button. Hold the
q
button and rotate the
front or rear dial to switch cards while playback is in progress. This does not change the option
selected for [
q
Slot].
388
Setting the card to record to (
K
Card Slot
Settings /
n
Card Slot Settings)
B