Shooting without the vibration caused by
shutter button operations (Anti-Shock
H
Settings)
P A S M B
n
Anti-shock shooting modes can be used to reduce the slight blur caused by shutter motion.
Use this option when even slight camera motion can cause blur, for example during macro or
telephoto photography.
Menu
MENU
U
a
U
7. Drive Mode
U
Anti-Shock
H
Settings
Anti-Shock
H
[Off]: Anti-shock shooting modes ([
E
], [
F
], etc.) are not displayed on
the drive mode selection screen. Normal shooting modes ([
F
], [
g
], etc.) are
displayed.
[On]: Anti-shock shooting modes ([
E
], [
F
], etc.) are displayed on the
drive mode selection screen. Normal shooting modes ([
F
], [
g
], etc.) are not
displayed.
Waiting
Time
Choose how long the camera waits to begin shooting after the shutter button is
pressed all the way down when shooting in anti-shock shooting modes.
[0sec], [1/8sec], [1/4sec], [1/2sec], [1sec], [2sec], [4sec], [8sec], [15sec], [30sec]
Be sure there is a check (
P
) next to a sequential shooting mode with
t
.
Select a mode with
t
), press the OK button, then take pictures. After the specified time
elapses, the shutter will be released and pictures will be taken.
197
Shooting without the vibration caused by shutter
button operations (Anti-Shock
H
Settings)
