1
EN
Shooting, Playback, and Erasing
Shooting with optimum
aperture value and shutter
speed (
P
mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance and so
on as needed.
For details on the functions that can be adjusted,
see “Menus for Shooting Functions” on page 24.
1
Press the
n
button to turn on
the camera.
10
M
4
IN
N
ORM
P
Monitor
(standby mode screen)
Number of storable still pictures (p. 49)
P
mode indicator
If
P
mode is not displayed, press the
K
button a few times to select it.
Current shooting mode display
Press the
n
button again to turn off
the camera.
Before shooting, make sure that the lens is
clean.
2
Hold the camera, and compose the
shot.
1/400 F3.7
P
Horizontal grip
Vertical grip
Monitor
When holding the camera, keep your
fingers and other objects away from the
flash.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
1/400 F3.7
P
AF target mark
Press halfway
Shutter speed
Aperture value
“Focusing” (p. 45)
●
●
