1
Setup
12
EN
Setup
Battery indicator
As the battery loses its remaining charge, the
battery indicator on the display changes as
follows:
• [
] indicates there is little remaining
battery charge. Charge the battery. When
the battery has run out, [
] and
[
Battery low
] appears, operation stops.
TIP
•
Charging the recorder, release the
HOLD mode. While the recorder is in
HOLD mode, any button operations are
disabled (
☞
•
Charging time: About 3 hours*
* Approximate time needed to fully
charge a completely flat battery at
room temperature.
The charging time depends on the
amount of remaining power and the
state of the battery.
NOTE
•
Never attempt to charge an alkaline
battery, lithium battery or other
primary cell battery. Fluid leakage or
overheating may cause the recorder to
malfunction.
•
The power of PC must be ON to charge
the battery using the USB connector.
You cannot charge the battery when
the power of PC is OFF, or the PC is in
standby, sleep or auto power off mode.
•
Do not use a USB hub when charging
the battery by connecting to the PC.
•
When [
]
*1
or [
]
*2
is displayed
the battery cannot be charged. Charge
the battery in an ambient temperature
of between 5 and 35°C (41 and 95°F).
*1
[
]: Ambient temperature is too
low.
*2
[
]: Ambient temperature is too
high
•
If battery life has become noticeably
short on a full charge, replace the
battery with a new one.
•
Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
•
Use the USB extension cable provided
if needed.
•
Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if another manufacturer’s
cable is used. Only use the Olympus
USB extension cable with the voice
recorder and never use if a product
from another manufacturer is used.
•
Use only the Olympus USB connecting
USB-AC adapter model provided
(F-5AC).
