84
6
Playback
Playback on a TV
Use the AV cable provided with the camera to play back recorded images
on your TV. You can play back both still pictures and movies on your TV.
1
Make sure that the TV and camera are turned off. Connect the
multi-connector on the camera to the video input terminal on
the TV using the AV cable provided with the camera.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction manual.
3
Press the POWER switch to turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
TIPS
• You are recommended to use the optional AC adapter when playing back
pictures on a TV.
• The close-up playback, index display and auto playback functions can also
be used on a TV screen.
Note
• Make sure that the camera’s video output signal type is the same as the TV’s
video signal type.
g
“Video output selection” (P.85)
• The camera’s monitor turns off automatically when the AV cable is connected
to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
Mode dial
Connect to the TV’s video input
(yellow) and audio input (white)
terminals.
AV cable
(provided)
Connector cover
Multi-connector
Hook your finger on this
part and pull open the
connector cover.
