10-004209-01EN [Q7750159], Rev. 2, May 2018
Operation
89
3.4.4.3
Touch Calibration Screen
Figure 3
‑
38 The Touch calibration screen
This option allows calibration of the touchscreen. Typically, this should not be
necessary.
Touch the screen as the markers appear in the four corners of the screen.
Olympus recommends that the markers be touched with a small object to enhance the
touch position accuracy during calibration.
The new calibration is stored immediately when the fourth marker is pressed. The
calibration utility exits and return to the
System Utilities
screen. To abort the
calibration, the system power may be turned off before the last marker is pressed.
3.4.4.4
Joystick Calibration Screen
Typically joystick calibration is only necessary when a joystick off-center error is
detected upon start up (see Figure 3-39 on page 90).
TIP
Summary of Contents for SteerROVER
