Olympus SteerROVER, User Manual, Page: 27 / 266

10-004209-01EN [Q7750159], Rev. 2, May 2018
Important Information — Please Read Before Use 17
No Entry Fall Zone
The area below a SteerROVER scanner must be kept clear at all times. A clearly
marked NO ENTRY FALL ZONE must be cordoned off directly below the area of
scanner operation, according to the dimensions shown below.
CAUTION! DO NOT operate the SteerROVER scanner on
an inspection surface that is electrically connected to a
component that is being welded.
CAUTION! Do not disconnect under load. Shut off power
before connection or disconnecting. Permanent damage to
electronics could occur.
Emergency Stop. This symbol indicates emergency stop
button.
Table 3 Warning symbols (continued)
Symbol Description